Forklifts are extremely useful workplace
vehicles, as long as they are used safely and appropriately by operators who
are appropriately trained and competent to use them.
The following forklift safety tips will
help you and those you work with stay safe around forklifts.
Check Items
Visual Checks
1 General: Good condition with no damage,
excessive dirt or rust. Any defects previously noted repaired.
2 Forks: Correctly positioned, not damaged,
cracked, bent or worn. Anchor pins secure and not worn, loose or bent.
3 Carriage Plate: No damage or distortion,
sitting square to the mast and lubricated. End stop bolts engaged and secure.
4 Mast: No damage, distortion or cracks. No
undue wear, scoring, dirt or foreign bodies in channels. End stops secure.
Rollers, no uneven
wear or incorrect tracking. Slides intact
and secure.
5 Back Rest Extension / Load Guard: In good
condition, secure with no distortion or cracks.
6 Lift Chains: Not damaged worn or
stretched, no broken links or rust. All pins in place.
7 Tyres: No damage, excessive dirt or wear,
rust, cracks, splits or separation of tyres and rims. Pneumatic tyres correct
air pressure.
8 Wheels: Undamaged and free from
obstruction and debris. All nuts secure and in place.
9 Overhead Guard / Roll Over Protection
Frame: Secure, undamaged with no loose items.
10 Energy Source:
• Gas or Diesel: Engine oil, fuel and radiator water level correct.
Gas bottle secured, no rust, corrosion or damaged pipes, hoses or seals.
• Electric: Electrolyte level, battery plug and connections correct.
Power cable intact, connected and secure. No exposed wires, battery
brackets secure and battery adequately
charged.
11 Hydraulics: No damage or fluid leaks, no
splits in hoses, no leaks around fittings.
12 Identification / Rating Plate: Intact,
clean and legible.
13 Operator’s Compartment: Clean with no
loose items.
14 Access: Steps and grab handles in good
condition and clean.
15 Lights, Windscreen and Mirrors (if
fitted): Clean and undamaged.
16 Fire Extinguisher (if fitted): Secure
and charged
Operational Checks
17 Seat: Good condition, secure and
adjusted correctly.
18 Safety Belt: Accessible, in good
condition and working correctly.
19 Ignition & Electrical System:
Working correctly. All gauges and instruments visible and working.
20 Reversing Alarm and Horn: Working
correctly and audible.
21 Warning Lights & Lights (if fitted):
Working correctly.
22 Hydraulic Controls: Working smoothly and
correctly.
23 Brakes (Foot & Parking): Working
correctly.
24 Clutch & Gearshift: Working smoothly
and correctly.
25 Steering: Working correctly with no
excessive play.
26 Exhaust: No excessive smoke, sparks or
flame
|